| 1. | Design specification for deoxidation of injected water in oilfield
油田注水脱氧设计规范 |
| 2. | Coal seam injecting water boring hole technology under special condition
特殊条件下的煤层注水钻孔技术 |
| 3. | Chemical cleaning of injected water pipeline in liuzan workplace in jidong oilfield
血液透析机的日常清洁与消毒 |
| 4. | Dust suppression by using dynamic pressure injecting water in fully - mechanized sublevel caving faces
综采放顶煤工作面动压注水降尘 |
| 5. | Sensitivity analysis is made to injected water volume adjustment and reserves potential
并对注水量的修正和储量潜力进行了敏感性分析。 |
| 6. | Evaluation and optimization of control indications of injected water quality in jianghan oil area
江汉油区注入水水质标准控制指标评价和优选 |
| 7. | Analysis of heat transfer characteristics for scroll air compressors with injected water
空气源热泵冷热水机组室外换热器结霜工况下数学模型的建立 |
| 8. | In addition , the un qualified injected water will cause the gathering and transporting systems and borehole to be corroded and will form scale in them , which will greatly reduce the waterflood effect
此外，不合格的注入水还会引起集输系统和井筒的腐蚀与结垢，从而大大降低注水效果。 |
| 9. | This discovery lends credence to the controversial idea of forcefully injecting water or steam into faults at the base of an unstable flank to trigger the stress - relieving earthquakes needed to let it down slowly
这项发现无疑为一个争议性的构想打了一剂强心针：在不稳固边坡底部的断层，强行注入水或蒸气，目的是引发地震、释放应力，以缓慢降低边坡坡度。 |
| 10. | To avoid and reduce these unfavorable factors , the injected water quality must be evaluated and the rational and practicable water quality guideline must be determined to protect oil and gas reservoirs and to improve oil recovery
为了避免和减少这些不利因素，必须对注入水的水质进行评定，确定合理可行的水质指标，从而达到保护油气层、提高采收率的目的。 |
